Arris DG1680A-TW Users Guide Manual de usuario descargar pdf (Pagina 28)

Chapter 5: Configuring Your Ethernet Connection

5. Click Properties to open the Properties window.

6. Select

Internet Protocol Version 4 (TCP/IPv4) and click Properties to configure TCP/IPv4.

Note: If your cable provider requires TCP/IP version 6, select Internet Protocol Version 6

(TCP/IPv6) and click Properties to configure TCP/IPv6.

The TCP/IP properties window for the version you selected displays.

7. For either TCP/IPv4 or TCP/IPv6, select

Obtain an IP address automatically and Obtain DNS

server address automatically

, unless instructed otherwise by your cable provider.

8. Click

OK to accept the new settings and close the Properties window. Then click Close to

back out of the remaining setup screens.

TCP/IP Configuration for MacOS X

Follow these steps to configure the Ethernet interface on a MacOS X operating system.

1. Open System Preferences, either by choosing

System Preferences from the Apple menu or

by clicking the System Preferences icon in the dock.

2. Click the

Network icon.

3. Choose

Automatic from the Location drop-down menu, and Built-in Ethernet from the Show

menu.

4. Choose the TCP/IP tab, if necessary.

If you are using

TCP/IPv4, go to step 5.

If your cable provider requires

TCP/IPv6, go to step 8.

5. Choose

Using DHCP from the Configure IPv4 menu.

6. If necessary, click the

Renew DHCP Lease button.

7. Close the System Properties application.

TCP/IPv4 configuration is completed.

8. If you are using TCP/IPv6, click

Configure IPv6 near the bottom of the previous window.

9. Choose

Automatically from the Configure IPv6 drop-down menu and click OK.

10. Close the System Properties application.

Release 16 STANDARD 1.3 March 2015 Touchstone DG1680 Data Gateway User Guide 28

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 38 39

Sin comentarios

Arris DG1680A-TW Users Guide Manual de usuario Pagina 28