Arris 2247-N8-10NA (v9.1.x) User Manual Manual de usuario descargar pdf (Pagina 72)

Motorola 2247-N8 DSL Wi-Fi Gateway User Guide

Please visit www.motorola.com/us/support for FAQs and additional product documentation. 72

How to - use the Wireless Congestion test function:

Click the Run Congestion Detection button.

Note: The wireless congestion test will temporarily suspend the operation of the 2247-N8’s wireless network.

Once the congestion test is complete, review the congestion statistics report that identifies an Access Point count and Congestion Score (from 1 to

10, with higher values indicating lower congestion) for each of the 11 Wi-Fi channels supported by the 2247-N8.

How to - restart the 2247-N8 wireless network:

Click the Restart Wireless button.

The wireless reset shuts down the Wi-Fi network and restarts the wireless network. If you are accessing the Web management interface through a

wireless connection, you will be disconnected from the 2247-N8.

The Wireless > Status page also shows the following statistics:

The statistics counters can be reset at any time by clicking the Clear Statistics button.

Wireless Status information, including:

 Wireless Radio Status: Indicates whether the Wi-Fi radio is Enabled or Disabled.

 Network Name (SSID): This is the name or ID that is displayed to a client scan.

 Hide SSID: May be either On or Off. If On, your SSID will not appear in a client scan.

 Wireless Security: The type of wireless encryption security in use. May be Disabled, WPA or WEP,.

 Network Key: Shows the information of the security encryption key in use.

 Mode: May be 802.11B only, 802.11G only, 802.11N only, 802.11 B/G or 802.11 B/G/N.

 Bandwidth: The capacity of the wireless LAN to carry traffic in megahertz.

 Current Radio Channel: The radio channel that your Wi-Fi network is broadcasting on.

 Radio Channel Selection: May be set to automatic or manually selected.

 MAC Address Filtering: May be either On or Off. If On, you can accept or block client devices from your WLAN based on their MAC address.

 Power Level: May be adjusted up to 100%, lower if multiple wireless access points are in use, and might interfere with each other.

 Wireless MAC Address: Shows the information of the MAC address of the wireless subsystem.

LAN Wireless Statistics, including:

 Transmit Bytes: Number of bytes transmitted on the Wi-Fi network.

 Receive Bytes: Number of bytes received on the Wi-Fi network.

 Transmit Packets: Number of packets transmitted on the Wi-Fi network.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 130 131

Sin comentarios

Arris 2247-N8-10NA (v9.1.x) User Manual Manual de usuario Pagina 72