Arris Touchstone TM401 Guía de usuario descargar pdf (Pagina 17)

Touchstone TM401 Telephony Modem User’s Guide 17

Safety Getting Started Installation Ethernet Configuration Usage Troubleshooting Glossary

Connecting the Telephony Modem

WARNING: Connecting the Telephony Modem to the home's existing wiring

should only be performed by a qualified telephone technician. Physical connec-

tions to the previous telephone provider must be removed and the wiring must

be checked for unexpected voltages. Discontinuation of service alone is not ad-

equate. Failure to do so may result in loss of service and/or permanent damage

to the EMTA.

1 Connect one end of the coaxial cable to the cable outlet or splitter, and the

other end to the Telephony Modem’s Cable connector (E). Tighten the con-

nections by hand.

2 Insert the plug from the AC adapter or the power cord into the Power con-

nector on the Telephony Modem (A).

3 Insert the power cord into a convenient AC outlet.

The Power light on the front of the Telephony Modem should light up, then

start flashing. See Troubleshooting

if the Power light does not turn on.

4 Connect one end of the Ethernet cable to the port on the back of the Tele-

phony Modem labeled “Ethernet 10/100,” (C) and the other end to the

Ethernet port on a computer, hub, or broadband router.

Note: If you are connecting to a computer, use the Ethernet cable included

in the Telephony Modem package.

5 Connect one end of the telephone cable to the telephone port on the back

of the Telephony Modem (B). Connect the other end to the telephone.

ear

ane

TM401

CA B

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 42 43

Sin comentarios

Arris Touchstone TM401 Guía de usuario Pagina 17